玻璃門安裝的方法和步驟很多人還不知道，現在就跟著濟南鏡片安裝廠家一起看看吧！

Many people do not know the method and steps of glass door installation. Now let's follow the Jinan lens installation manufacturer to have a look!

1、厚玻璃門是指用厚度超過12mm的玻璃裝飾的門。

1. Thick glass door refers to the door decorated with glass with a thickness of more than 12mm.

2、一般由活動扇和固定玻璃組成，其門框分為不銹鋼、銅和鋁合金。

2. It is generally composed of movable leaf and fixed glass, and its door frame is divided into stainless steel, copper and aluminum alloy.

3、準備工作：施工前檢查地面標高和門框頂部的結構標高是否符合設計要求。

3. Preparations: Before construction, check whether the ground elevation and the structural elevation at the top of the door frame meet the design requirements.

4、確定門框位置和玻璃安裝方式。

4. Determine the door frame position and glass installation method.

5、根據設計要求選擇并切割玻璃。

5. Select and cut glass according to design requirements.

6、準備好型材門框、限位槽、板材以及玻璃膠、地彈簧、木螺釘、自攻螺釘?shù)容o助材料。

6. Prepare the profile door frame, limit slot, plate, glass glue, floor spring, wood screw, self tapping screw and other auxiliary materials.

7、固定門框放線中厚玻璃的安裝要點。

7. Key points for fixing the door frame and setting out the medium thick glass.

8、根據設計要求，放出門框的位置線，確定固定件和活動件的安裝控制線。

8. According to the design requirements, set out the position line of the door frame, and determine the installation control line of the fixed parts and movable parts.

9、門框頂部不銹鋼限位槽的寬度應比玻璃厚度大2~4mm，槽深10~20mm。

9. The width of the stainless steel limit slot at the top of the door frame shall be 2~4mm greater than the thickness of the glass, and the slot depth shall be 10~20mm.

10、安裝不銹鋼貼面木底座時，先將方木固定在地面上，再將不銹鋼面板粘在方木上。

10. When installing the stainless steel veneer wood base, first fix the square wood on the ground, and then stick the stainless steel panel on the square wood.

11、鋁合金方管可以用鋁角碼固定在框架柱上，也可以用螺釘固定在預埋件上。

11. The aluminum alloy square tube can be fixed on the frame column with aluminum corner code, or it can be fixed on the embedded parts with screws.

12、切割玻璃(通常提前切割，然后鋼化，然后運到現場安裝)應測量實際底部、中部和頂部尺寸。

12. The actual bottom, middle and top dimensions of cut glass (usually cut in advance, then tempered, and transported to the site for installation) shall be measured.

玻璃門的全部安裝過程就從12方面來講解完畢，當然其中的注意細節也不算少，大家要及時進行了解檢查，更多相關事項就來我們網站http://www.huadonglvxing.com.cn了解吧。

The whole installation process of the glass door is explained from 12 aspects. Of course, there are not too few details to pay attention to. You should understand and check in time, and more relevant matters will come to our website http://www.huadonglvxing.com.cn Understand.